ANDERSON ERICKSON

Operating

Oil power plant

Capacity
2 MW
Primary fuel
Oil
County
Polk County
Operator
MIDAMERICAN ENERGY CO
Status
Operating
Commissioned
2000
EIA plant ID
56138
Coordinates
41.6014, -93.5765

See it on the map

ANDERSON ERICKSON, a 2 MW Oil power plant in Polk County, Iowa. Operated by MIDAMERICAN ENERGY CO, commissioned 2000.

Weather peril exposure

ANDERSON ERICKSON is a 2 MW oil power plant in Polk County, IA, operated by MIDAMERICAN ENERGY CO, commissioned in 2000. Polk County carries moderate modeled catastrophe exposure in the FEMA National Risk Index, scoring 2.4 of 5 at the 35th national percentile. Strong wind is the leading peril, rated Very High by FEMA at the 84th percentile.

The Bywatts loss layer is calibrated to solar PV hardware, so it is not applied to an oil plant. The ratings below are the FEMA National Risk Index county hazard ratings for this location.

2.4 of 5Modeled catastrophe exposure
ModerateExposure band
Strong windLeading peril
Relatively ModerateFEMA county risk rating

Polk County hazard ratings

PerilFEMA ratingNational percentilePeril scoreEvents per year
Strong windVery High84th4.4 of 56.0
TornadoRelatively High77th4.1 of 50.59
Heat waveRelatively High74th4.0 of 57.3
Ice stormRelatively High63rd3.5 of 50.93
Winter weatherRelatively High47th2.9 of 514.1
HailRelatively High43rd2.7 of 56.1
LightningRelatively Moderate30th2.2 of 544.3
WildfireVery Low27th2.1 of 5<0.01
EarthquakeRelatively Low19th1.8 of 5<0.01
Riverine floodingRelatively Moderate15th1.6 of 55.1
HurricaneVery Low5th1.2 of 5<0.01

Perils not assessed in Polk County

These perils carry no usable National Risk Index figure for this county, so they are excluded from the scoring rather than scored zero. A zero would claim the peril was assessed and found benign.

PerilWhy it is not scored
Coastal floodingFEMA rating is "Not Applicable" for this county

Model hail, wind and flood exposure for Polk County in the weather risk calculator

Ratings are the FEMA National Risk Index county hazard ratings; the peril score is a Bywatts transform of the FEMA national percentile. Full data sources and the solar vulnerability methodology are in the weather risk calculator.

Modeled estimate for screening and negotiation. Built from FEMA National Risk Index county hazard data and a solar vulnerability layer documented above. Not a quote, a binder, or actuarial advice, and not a substitute for a carrier's own model. Hazard data: FEMA National Risk Index December 2025, synced 2026-07-24. Resolution is county level, not site level.