ARCHER DANIELS MIDLAND CLINTON

Operating

Coal power plant

Capacity
180 MW
Primary fuel
Coal
County
Clinton County
Operator
ARCHER DANIELS MIDLAND CO
Status
Operating
Commissioned
2009
EIA plant ID
10860
Generators
2
Technology
Conventional Steam Coal
Net generation (2024)
780 GWh
Capacity factor (2024, EIA nameplate)
49%
Data vintage
EIA-860 2024 final; EIA-923 2022-2024 final
Coordinates
41.8206, -90.2097

See it on the map

ARCHER DANIELS MIDLAND CLINTON, a 180 MW Coal power plant in Clinton County, Iowa. Operated by ARCHER DANIELS MIDLAND CO, commissioned 2009.

How ARCHER DANIELS MIDLAND CLINTON compares

With 180 MW of capacity, ARCHER DANIELS MIDLAND CLINTON ranks 22nd among the 198 operating power plants Bywatts maps in Iowa and 10th of the 19 operating Coal plants in the state. It accounts for about 2.7% of Iowa's operating Coal capacity and 1.2% of all operating capacity in the state. Nationally it is the 208th-largest of the 324 operating Coal plants in the database. Commissioned in 2009, it is newer than 76% of the 198 operating Iowa plants with a recorded commissioning year. Its operator, ARCHER DANIELS MIDLAND CO, runs 3 operating plants in Iowa totaling 444 MW.

EIA-860 lists 2 generators at the site with 180 MW of nameplate capacity, all conventional steam coal technology. Net generation was 780 GWh in 2024 (a 49% capacity factor), up 1% from 2022.

Grid neighborhood

The closest transmission line found within 10 miles is a 161 kV line, about 0.9 miles away. Another 3 operating power plants totaling 2,633 MW sit within 25 miles; the largest is QUAD CITIES GENERATING STATION (2,019 MW, Nuclear).

Computed by Bywatts from HIFLD power plant and transmission line records and EIA-860/923 survey data; distances are straight-line. Sources and methodology

Weather peril exposure

ARCHER DANIELS MIDLAND CLINTON is a 180 MW coal power plant in Clinton County, IA, operated by ARCHER DANIELS MIDLAND CO, commissioned in 2009. Clinton County carries high modeled catastrophe exposure in the FEMA National Risk Index, scoring 4.2 of 5 at the 80th national percentile. Strong wind is the leading peril, rated Relatively High by FEMA at the 88th percentile.

The Bywatts loss layer is calibrated to solar PV hardware, so it is not applied to a coal plant. The ratings below are the FEMA National Risk Index county hazard ratings for this location.

4.2 of 5Modeled catastrophe exposure
HighExposure band
Strong windLeading peril
Relatively LowFEMA county risk rating

Clinton County hazard ratings

PerilFEMA ratingNational percentilePeril scoreEvents per year
Strong windRelatively High88th4.5 of 56.1
HailRelatively Moderate83rd4.3 of 54.0
Heat waveRelatively Low81st4.2 of 56.2
TornadoRelatively Moderate77th4.1 of 50.66
Riverine floodingRelatively Low53rd3.1 of 52.5
Ice stormRelatively Moderate53rd3.1 of 50.52
WildfireVery Low39th2.5 of 5<0.01
EarthquakeVery Low35th2.4 of 5<0.01
LightningRelatively Low17th1.7 of 542.1
Winter weatherRelatively Low8th1.3 of 516.7
HurricaneVery Low2nd1.1 of 5<0.01

Perils not assessed in Clinton County

These perils carry no usable National Risk Index figure for this county, so they are excluded from the scoring rather than scored zero. A zero would claim the peril was assessed and found benign.

PerilWhy it is not scored
Coastal floodingFEMA rating is "Not Applicable" for this county

Model hail, wind and flood exposure for Clinton County in the weather risk calculator

Ratings are the FEMA National Risk Index county hazard ratings; the peril score is a Bywatts transform of the FEMA national percentile. Full data sources and the solar vulnerability methodology are in the weather risk calculator.

Modeled estimate for screening and negotiation. Built from FEMA National Risk Index county hazard data and a solar vulnerability layer documented above. Not a quote, a binder, or actuarial advice, and not a substitute for a carrier's own model. Hazard data: FEMA National Risk Index December 2025, synced 2026-07-24. Resolution is county level, not site level.