SHENANDOAH

Operating

Oil power plant

Capacity
20 MW
Primary fuel
Oil
County
Page County
Operator
MIDAMERICAN ENERGY CO
Status
Operating
Commissioned
2000
EIA plant ID
7850
Coordinates
40.7660, -95.3725

See it on the map

SHENANDOAH, a 20 MW Oil power plant in Page County, Iowa. Operated by MIDAMERICAN ENERGY CO, commissioned 2000.

Weather peril exposure

SHENANDOAH is a 20 MW oil power plant in Page County, IA, operated by MIDAMERICAN ENERGY CO, commissioned in 2000. Page County carries critical modeled catastrophe exposure in the FEMA National Risk Index, scoring 4.2 of 5 at the 81st national percentile. Heat wave is the leading peril, rated Relatively Moderate by FEMA at the 97th percentile.

The Bywatts loss layer is calibrated to solar PV hardware, so it is not applied to an oil plant. The ratings below are the FEMA National Risk Index county hazard ratings for this location.

4.2 of 5Modeled catastrophe exposure
CriticalExposure band
Heat waveLeading peril
Very LowFEMA county risk rating

Page County hazard ratings

PerilFEMA ratingNational percentilePeril scoreEvents per year
Heat waveRelatively Moderate97th4.9 of 58.2
TornadoRelatively Moderate94th4.8 of 50.42
HailRelatively Moderate84th4.3 of 56.1
Strong windRelatively Low74th3.9 of 54.1
Winter weatherRelatively Low72nd3.9 of 512.3
LightningRelatively Low62nd3.5 of 546.3
Ice stormRelatively Low60th3.4 of 50.57
WildfireVery Low46th2.8 of 5<0.01
Riverine floodingVery Low28th2.1 of 50.71
EarthquakeVery Low19th1.8 of 5<0.01

Perils not assessed in Page County

These perils carry no usable National Risk Index figure for this county, so they are excluded from the scoring rather than scored zero. A zero would claim the peril was assessed and found benign.

PerilWhy it is not scored
HurricaneFEMA rating is "No Rating" for this county
Coastal floodingFEMA rating is "Not Applicable" for this county

Model hail, wind and flood exposure for Page County in the weather risk calculator

Ratings are the FEMA National Risk Index county hazard ratings; the peril score is a Bywatts transform of the FEMA national percentile. Full data sources and the solar vulnerability methodology are in the weather risk calculator.

Modeled estimate for screening and negotiation. Built from FEMA National Risk Index county hazard data and a solar vulnerability layer documented above. Not a quote, a binder, or actuarial advice, and not a substitute for a carrier's own model. Hazard data: FEMA National Risk Index December 2025, synced 2026-07-24. Resolution is county level, not site level.