DOMTAR - WOODLAND MILL

Operating

Biomass power plant

Capacity
68 MW
Primary fuel
Biomass
County
Washington County
Operator
WOODLAND PULP LLC
Status
Operating
Commissioned
1906
EIA plant ID
10613
Generators
12
Technology
Wood/Wood Waste Biomass
Net generation (2024)
382 GWh
Capacity factor (2024, EIA nameplate)
64%
Data vintage
EIA-860 2024 final; EIA-923 2022-2024 final
Coordinates
45.1568, -67.4016

See it on the map

DOMTAR - WOODLAND MILL, a 68 MW Biomass power plant in Washington County, Maine. Operated by WOODLAND PULP LLC, commissioned 1906.

How DOMTAR - WOODLAND MILL compares

With 68 MW of capacity, DOMTAR - WOODLAND MILL ranks 13th among the 83 operating power plants Bywatts maps in Maine and 3rd of the 15 operating Biomass plants in the state. It accounts for about 14% of Maine's operating Biomass capacity and 1.6% of all operating capacity in the state. Nationally it is the 47th-largest of the 350 operating Biomass plants in the database. Commissioned in 1906, it is older than 95% of the 81 operating Maine plants with a recorded commissioning year. It shares Washington County with 3 other operating plants, including STETSON WIND I and INDECK JONESBORO ENERGY CENTER.

EIA-860 lists 12 generators at the site with 68 MW of nameplate capacity, mainly wood/wood waste biomass technology. Net generation was 382 GWh in 2024 (a 64% capacity factor), up 2% from 2022. Its generators came online between 1906 and 1970.

Grid neighborhood

The closest transmission line found within 10 miles is a 345 kV line owned by EMERA MAINE, about 3.9 miles away.

Computed by Bywatts from HIFLD power plant and transmission line records and EIA-860/923 survey data; distances are straight-line. Sources and methodology

Weather peril exposure

DOMTAR - WOODLAND MILL is a 68 MW biomass power plant in Washington County, ME, operated by WOODLAND PULP LLC, commissioned in 1906. Washington County carries high modeled catastrophe exposure in the FEMA National Risk Index, scoring 3.4 of 5 at the 61st national percentile. Coastal flooding is the leading peril, rated Relatively Moderate by FEMA at the 98th percentile.

The Bywatts loss layer is calibrated to solar PV hardware, so it is not applied to a biomass plant. The ratings below are the FEMA National Risk Index county hazard ratings for this location.

3.4 of 5Modeled catastrophe exposure
HighExposure band
Coastal floodingLeading peril
Relatively LowFEMA county risk rating

Washington County hazard ratings

PerilFEMA ratingNational percentilePeril scoreEvents per year
Coastal floodingRelatively Moderate98th4.9 of 511.3
Ice stormRelatively High94th4.8 of 51.0
Winter weatherRelatively High92nd4.7 of 522.8
HurricaneRelatively Moderate88th4.5 of 50.10
EarthquakeVery Low43rd2.7 of 5<0.01
WildfireVery Low28th2.1 of 5<0.01
HailVery Low16th1.7 of 50.23
Riverine floodingRelatively Low13th1.5 of 51.0
LightningRelatively Moderate11th1.5 of 513.1
TornadoVery Low6th1.2 of 50.04
Heat waveVery Low2nd1.1 of 50.64
Strong windVery Low1st1.0 of 50.54

Model hail, wind and flood exposure for Washington County in the weather risk calculator

Ratings are the FEMA National Risk Index county hazard ratings; the peril score is a Bywatts transform of the FEMA national percentile. Full data sources and the solar vulnerability methodology are in the weather risk calculator.

Modeled estimate for screening and negotiation. Built from FEMA National Risk Index county hazard data and a solar vulnerability layer documented above. Not a quote, a binder, or actuarial advice, and not a substitute for a carrier's own model. Hazard data: FEMA National Risk Index December 2025, synced 2026-07-24. Resolution is county level, not site level.