TABLE ROCK
OperatingHydro power plant
- Capacity
- 200 MW
- Primary fuel
- Hydro
- County
- Taney County
- Operator
- USCE-LITTLE ROCK DISTRICT
- Status
- Operating
- Commissioned
- 1959
- EIA plant ID
- 2166
- Generators
- 4
- Technology
- Conventional Hydroelectric
- Net generation (2024)
- 368 GWh
- Capacity factor (2024, EIA nameplate)
- 21%
- Data vintage
- EIA-860 2024 final; EIA-923 2022-2024 final
- Coordinates
- 36.5964, -93.3101
TABLE ROCK, a 200 MW Hydro power plant in Taney County, Missouri. Operated by USCE-LITTLE ROCK DISTRICT, commissioned 1959.
How TABLE ROCK compares
With 200 MW of capacity, TABLE ROCK ranks 24th among the 92 operating power plants Bywatts maps in Missouri and 2nd of the 7 operating Hydro plants in the state. It accounts for about 29% of Missouri's operating Hydro capacity and 1.0% of all operating capacity in the state. Nationally it is the 89th-largest of the 1,243 operating Hydro plants in the database. Commissioned in 1959, it is older than 82% of the 89 operating Missouri plants with a recorded commissioning year. It shares Taney County with one other operating plant, OZARK BEACH.
EIA-860 lists 4 generators at the site with 200 MW of nameplate capacity, all conventional hydroelectric technology. Net generation was 368 GWh in 2024 (a 21% capacity factor), down 42% from 2022. Its generators came online between 1959 and 1961.
Grid neighborhood
The closest transmission line found within 10 miles is a 161 kV line, under 0.1 miles away. One other operating power plant sits within 25 miles: OZARK BEACH (16 MW, Hydro).
Computed by Bywatts from HIFLD power plant and transmission line records and EIA-860/923 survey data; distances are straight-line. Sources and methodology
Weather peril exposure
TABLE ROCK is a 200 MW hydro power plant in Taney County, MO, operated by USCE-LITTLE ROCK DISTRICT, commissioned in 1959. Taney County carries elevated modeled catastrophe exposure in the FEMA National Risk Index, scoring 3.0 of 5 at the 50th national percentile. Ice storm is the leading peril, rated Very High by FEMA at the 94th percentile.
The Bywatts loss layer is calibrated to solar PV hardware, so it is not applied to a hydro plant. The ratings below are the FEMA National Risk Index county hazard ratings for this location.
Taney County hazard ratings
| Peril | FEMA rating | National percentile | Peril score | Events per year |
|---|---|---|---|---|
| Ice storm | Very High | 94th | 4.8 of 5 | 1.9 |
| Riverine flooding | Relatively Moderate | 90th | 4.6 of 5 | 3.6 |
| Winter weather | Relatively Moderate | 80th | 4.2 of 5 | 10.1 |
| Lightning | Relatively High | 76th | 4.0 of 5 | 58.4 |
| Earthquake | Relatively Low | 72nd | 3.9 of 5 | <0.01 |
| Heat wave | Relatively Moderate | 69th | 3.7 of 5 | 13.2 |
| Wildfire | Relatively Low | 64th | 3.6 of 5 | <0.01 |
| Hail | Relatively Low | 55th | 3.2 of 5 | 6.6 |
| Tornado | Relatively Moderate | 48th | 2.9 of 5 | 0.44 |
| Strong wind | Relatively Moderate | 47th | 2.9 of 5 | 5.1 |
| Hurricane | Very Low | 27th | 2.1 of 5 | 0.01 |
Perils not assessed in Taney County
These perils carry no usable National Risk Index figure for this county, so they are excluded from the scoring rather than scored zero. A zero would claim the peril was assessed and found benign.
| Peril | Why it is not scored |
|---|---|
| Coastal flooding | FEMA rating is "Not Applicable" for this county |
Model hail, wind and flood exposure for Taney County in the weather risk calculator
Ratings are the FEMA National Risk Index county hazard ratings; the peril score is a Bywatts transform of the FEMA national percentile. Full data sources and the solar vulnerability methodology are in the weather risk calculator.
Modeled estimate for screening and negotiation. Built from FEMA National Risk Index county hazard data and a solar vulnerability layer documented above. Not a quote, a binder, or actuarial advice, and not a substitute for a carrier's own model. Hazard data: FEMA National Risk Index December 2025, synced 2026-07-24. Resolution is county level, not site level.