SHELDON

Operating

Coal power plant

Capacity
229 MW
Primary fuel
Coal
County
Lancaster County
Operator
NEBRASKA PUBLIC POWER DISTRICT
Status
Operating
Commissioned
1961
EIA plant ID
2277
Generators
2
Technology
Conventional Steam Coal
Net generation (2024)
653 GWh
Capacity factor (2024, EIA nameplate)
33%
Data vintage
EIA-860 2024 final; EIA-923 2022-2024 final
Coordinates
40.5592, -96.7847

See it on the map

SHELDON, a 229 MW Coal power plant in Lancaster County, Nebraska. Operated by NEBRASKA PUBLIC POWER DISTRICT, commissioned 1961.

How SHELDON compares

With 229 MW of capacity, SHELDON ranks 11th among the 86 operating power plants Bywatts maps in Nebraska and 5th of the 8 operating Coal plants in the state. It accounts for about 5.4% of Nebraska's operating Coal capacity and 2.7% of all operating capacity in the state. Nationally it is the 203rd-largest of the 324 operating Coal plants in the database. Commissioned in 1961, it is older than 54% of the 85 operating Nebraska plants with a recorded commissioning year. Its operator, NEBRASKA PUBLIC POWER DISTRICT, runs 12 operating plants in Nebraska totaling 3,065 MW. It shares Lancaster County with 5 other operating plants, including ROKEBY and TERRY BUNDY GENERATING STATION.

EIA-860 lists 2 generators at the site with 229 MW of nameplate capacity, all conventional steam coal technology. Net generation was 653 GWh in 2024 (a 33% capacity factor), down 35% from 2022. Its generators came online between 1961 and 1965.

Grid neighborhood

The closest transmission line found within 10 miles is a 115 kV line, under 0.1 miles away. Another 7 operating power plants totaling 671 MW sit within 25 miles; the largest is BEATRICE (303 MW, Natural Gas).

Computed by Bywatts from HIFLD power plant and transmission line records and EIA-860/923 survey data; distances are straight-line. Sources and methodology

Weather peril exposure

SHELDON is a 229 MW coal power plant in Lancaster County, NE, operated by NEBRASKA PUBLIC POWER DISTRICT, commissioned in 1961. Lancaster County carries critical modeled catastrophe exposure in the FEMA National Risk Index, scoring 4.7 of 5 at the 92nd national percentile. Tornado is the leading peril, rated Relatively High by FEMA at the 97th percentile.

The Bywatts loss layer is calibrated to solar PV hardware, so it is not applied to a coal plant. The ratings below are the FEMA National Risk Index county hazard ratings for this location.

4.7 of 5Modeled catastrophe exposure
CriticalExposure band
TornadoLeading peril
Relatively ModerateFEMA county risk rating

Lancaster County hazard ratings

PerilFEMA ratingNational percentilePeril scoreEvents per year
TornadoRelatively High97th4.9 of 50.78
Heat waveRelatively Low94th4.8 of 58.3
HailRelatively High93rd4.7 of 57.8
Strong windVery High92nd4.7 of 54.5
WildfireRelatively Moderate81st4.2 of 5<0.01
Winter weatherVery High75th4.0 of 513.5
Ice stormRelatively High74th4.0 of 50.88
LightningRelatively High65th3.6 of 545.9
Riverine floodingRelatively Moderate15th1.6 of 51.4
EarthquakeVery Low12th1.5 of 5<0.01

Perils not assessed in Lancaster County

These perils carry no usable National Risk Index figure for this county, so they are excluded from the scoring rather than scored zero. A zero would claim the peril was assessed and found benign.

PerilWhy it is not scored
HurricaneFEMA rating is "No Rating" for this county
Coastal floodingFEMA rating is "Not Applicable" for this county

Model hail, wind and flood exposure for Lancaster County in the weather risk calculator

Ratings are the FEMA National Risk Index county hazard ratings; the peril score is a Bywatts transform of the FEMA national percentile. Full data sources and the solar vulnerability methodology are in the weather risk calculator.

Modeled estimate for screening and negotiation. Built from FEMA National Risk Index county hazard data and a solar vulnerability layer documented above. Not a quote, a binder, or actuarial advice, and not a substitute for a carrier's own model. Hazard data: FEMA National Risk Index December 2025, synced 2026-07-24. Resolution is county level, not site level.