SIDNEY

Operating

Oil power plant

Capacity
14 MW
Primary fuel
Oil
County
Shelby County
Operator
DAYTON POWER & LIGHT CO
Status
Operating
Commissioned
1968
EIA plant ID
2852
Coordinates
40.2792, -84.1910

See it on the map

SIDNEY, a 14 MW Oil power plant in Shelby County, Ohio. Operated by DAYTON POWER & LIGHT CO, commissioned 1968.

Weather peril exposure

SIDNEY is a 14 MW oil power plant in Shelby County, OH, operated by DAYTON POWER & LIGHT CO, commissioned in 1968. Shelby County carries elevated modeled catastrophe exposure in the FEMA National Risk Index, scoring 3.2 of 5 at the 55th national percentile. Earthquake is the leading peril, rated Relatively Low by FEMA at the 84th percentile.

The Bywatts loss layer is calibrated to solar PV hardware, so it is not applied to an oil plant. The ratings below are the FEMA National Risk Index county hazard ratings for this location.

3.2 of 5Modeled catastrophe exposure
ElevatedExposure band
EarthquakeLeading peril
Relatively LowFEMA county risk rating

Shelby County hazard ratings

PerilFEMA ratingNational percentilePeril scoreEvents per year
EarthquakeRelatively Low84th4.4 of 5<0.01
Heat waveVery Low83rd4.3 of 53.9
Winter weatherRelatively Moderate65th3.6 of 512.0
Ice stormRelatively Moderate64th3.6 of 50.74
HailRelatively Moderate64th3.6 of 53.2
TornadoRelatively Moderate57th3.3 of 50.27
Strong windRelatively Moderate52nd3.1 of 52.8
LightningRelatively Moderate43rd2.7 of 543.6
HurricaneVery Low24th1.9 of 50.01
Riverine floodingRelatively Low17th1.7 of 51.9
WildfireVery Low1st1.0 of 5<0.01

Perils not assessed in Shelby County

These perils carry no usable National Risk Index figure for this county, so they are excluded from the scoring rather than scored zero. A zero would claim the peril was assessed and found benign.

PerilWhy it is not scored
Coastal floodingFEMA rating is "Not Applicable" for this county

Model hail, wind and flood exposure for Shelby County in the weather risk calculator

Ratings are the FEMA National Risk Index county hazard ratings; the peril score is a Bywatts transform of the FEMA national percentile. Full data sources and the solar vulnerability methodology are in the weather risk calculator.

Modeled estimate for screening and negotiation. Built from FEMA National Risk Index county hazard data and a solar vulnerability layer documented above. Not a quote, a binder, or actuarial advice, and not a substitute for a carrier's own model. Hazard data: FEMA National Risk Index December 2025, synced 2026-07-24. Resolution is county level, not site level.