WYGEN 2

Operating

Coal power plant

Capacity
95 MW
Primary fuel
Coal
County
Campbell County
Operator
BLACK HILLS POWER INC
Status
Operating
Commissioned
2008
EIA plant ID
56319
Generators
1
Technology
Conventional Steam Coal
Net generation (2024)
581 GWh
Capacity factor (2024, EIA nameplate)
70%
Data vintage
EIA-860 2024 final; EIA-923 2022-2024 final
Coordinates
44.2920, -105.3801

See it on the map

WYGEN 2, a 95 MW Coal power plant in Campbell County, Wyoming. Operated by BLACK HILLS POWER INC, commissioned 2008.

How WYGEN 2 compares

With 95 MW of capacity, WYGEN 2 ranks 18th among the 53 operating power plants Bywatts maps in Wyoming and 6th of the 8 operating Coal plants in the state. It accounts for about 2.1% of Wyoming's operating Coal capacity and 1.1% of all operating capacity in the state. Nationally it is the 237th-largest of the 324 operating Coal plants in the database. Commissioned in 2008, it is newer than 67% of the 53 operating Wyoming plants with a recorded commissioning year. Its operator, BLACK HILLS POWER INC, runs 5 operating plants in Wyoming totaling 459 MW. It shares Campbell County with 8 other operating plants, including DRY FORK STATION and WYODAK.

EIA-860 lists 1 generator at the site with 95 MW of nameplate capacity, all conventional steam coal technology. Net generation was 581 GWh in 2024 (a 70% capacity factor), down 19% from 2022.

Grid neighborhood

The nearest named substation is HUGHES (230 kV), about 8.8 miles away; the closest transmission line found within 10 miles is a 230 kV line owned by BLACK HILLS POWER, INC., under 0.1 miles away. Another 6 operating power plants totaling 1,116 MW sit within 25 miles; the largest is DRY FORK STATION (390 MW).

Computed by Bywatts from HIFLD power plant, substation and transmission line records and EIA-860/923 survey data; distances are straight-line. Sources and methodology

Weather peril exposure

WYGEN 2 is a 95 MW coal power plant in Campbell County, WY, operated by BLACK HILLS POWER INC, commissioned in 2008. Campbell County carries critical modeled catastrophe exposure in the FEMA National Risk Index, scoring 4.9 of 5 at the 97th national percentile. Hail is the leading peril, rated Relatively High by FEMA at the 98th percentile.

The Bywatts loss layer is calibrated to solar PV hardware, so it is not applied to a coal plant. The ratings below are the FEMA National Risk Index county hazard ratings for this location.

4.9 of 5Modeled catastrophe exposure
CriticalExposure band
HailLeading peril
Relatively LowFEMA county risk rating

Campbell County hazard ratings

PerilFEMA ratingNational percentilePeril scoreEvents per year
HailRelatively High98th4.9 of 52.2
WildfireRelatively Moderate90th4.6 of 5<0.01
EarthquakeRelatively Low80th4.2 of 5<0.01
Winter weatherRelatively High69th3.8 of 515.6
LightningRelatively Moderate46th2.9 of 538.4
TornadoRelatively Low30th2.2 of 50.82
Strong windRelatively Low19th1.8 of 51.1
Ice stormVery Low18th1.7 of 50.01
Riverine floodingRelatively Low18th1.7 of 50.75
Heat waveVery Low12th1.5 of 50.21

Perils not assessed in Campbell County

These perils carry no usable National Risk Index figure for this county, so they are excluded from the scoring rather than scored zero. A zero would claim the peril was assessed and found benign.

PerilWhy it is not scored
HurricaneFEMA rating is "Not Applicable" for this county
Coastal floodingFEMA rating is "Not Applicable" for this county

Model hail, wind and flood exposure for Campbell County in the weather risk calculator

Ratings are the FEMA National Risk Index county hazard ratings; the peril score is a Bywatts transform of the FEMA national percentile. Full data sources and the solar vulnerability methodology are in the weather risk calculator.

Modeled estimate for screening and negotiation. Built from FEMA National Risk Index county hazard data and a solar vulnerability layer documented above. Not a quote, a binder, or actuarial advice, and not a substitute for a carrier's own model. Hazard data: FEMA National Risk Index December 2025, synced 2026-07-24. Resolution is county level, not site level.