YATES DAM

Operating

Hydro power plant

Capacity
51 MW
Primary fuel
Hydro
County
Elmore County
Operator
ALABAMA POWER CO
Status
Operating
Commissioned
1928
EIA plant ID
21
Generators
2
Technology
Conventional Hydroelectric
Net generation (2024)
96.5 GWh
Capacity factor (2024, EIA nameplate)
22%
Data vintage
EIA-860 2024 final; EIA-923 2022-2024 final
Coordinates
32.5741, -85.8908

See it on the map

YATES DAM, a 51 MW Hydro power plant in Elmore County, Alabama. Operated by ALABAMA POWER CO, commissioned 1928.

How YATES DAM compares

With 51 MW of capacity, YATES DAM ranks 48th among the 64 operating power plants Bywatts maps in Alabama and 18th of the 23 operating Hydro plants in the state. It accounts for about 1.5% of Alabama's operating Hydro capacity and 0.2% of all operating capacity in the state. Nationally it is the 278th-largest of the 1,243 operating Hydro plants in the database. Commissioned in 1928, it is older than 89% of the 64 operating Alabama plants with a recorded commissioning year. Its operator, ALABAMA POWER CO, runs 22 operating plants in Alabama totaling 12,989 MW. It shares Elmore County with 4 other operating plants, including WALTER BOULDIN DAM and MARTIN DAM.

EIA-860 lists 2 generators at the site with 51 MW of nameplate capacity, all conventional hydroelectric technology. Net generation was 96.5 GWh in 2024 (a 22% capacity factor), down 32% from 2022.

Grid neighborhood

The closest transmission line found within 10 miles is a 115 kV line owned by ALABAMA POWER CO, under 0.1 miles away. Another 4 operating power plants totaling 627 MW sit within 25 miles; the largest is WALTER BOULDIN DAM (225 MW, Hydro).

Computed by Bywatts from HIFLD power plant and transmission line records and EIA-860/923 survey data; distances are straight-line. Sources and methodology

Weather peril exposure

YATES DAM is a 51 MW hydro power plant in Elmore County, AL, operated by ALABAMA POWER CO, commissioned in 1928. Elmore County carries moderate modeled catastrophe exposure in the FEMA National Risk Index, scoring 2.0 of 5 at the 25th national percentile. Riverine flooding is the leading peril, rated Relatively Moderate by FEMA at the 86th percentile.

The Bywatts loss layer is calibrated to solar PV hardware, so it is not applied to a hydro plant. The ratings below are the FEMA National Risk Index county hazard ratings for this location.

2.0 of 5Modeled catastrophe exposure
ModerateExposure band
Riverine floodingLeading peril
Relatively LowFEMA county risk rating

Elmore County hazard ratings

PerilFEMA ratingNational percentilePeril scoreEvents per year
Riverine floodingRelatively Moderate86th4.4 of 51.5
HurricaneRelatively Low71st3.8 of 50.08
EarthquakeRelatively Low68th3.7 of 5<0.01
TornadoRelatively Moderate65th3.6 of 50.55
WildfireVery Low49th2.9 of 5<0.01
LightningRelatively High46th2.8 of 566.7
Heat waveRelatively Moderate42nd2.7 of 59.0
Strong windRelatively Moderate38th2.5 of 51.2
HailVery Low29th2.2 of 52.6
Ice stormRelatively Low23rd1.9 of 50.42
Winter weatherVery Low9th1.4 of 51.4

Perils not assessed in Elmore County

These perils carry no usable National Risk Index figure for this county, so they are excluded from the scoring rather than scored zero. A zero would claim the peril was assessed and found benign.

PerilWhy it is not scored
Coastal floodingFEMA rating is "Not Applicable" for this county

Model hail, wind and flood exposure for Elmore County in the weather risk calculator

Ratings are the FEMA National Risk Index county hazard ratings; the peril score is a Bywatts transform of the FEMA national percentile. Full data sources and the solar vulnerability methodology are in the weather risk calculator.

Modeled estimate for screening and negotiation. Built from FEMA National Risk Index county hazard data and a solar vulnerability layer documented above. Not a quote, a binder, or actuarial advice, and not a substitute for a carrier's own model. Hazard data: FEMA National Risk Index December 2025, synced 2026-07-24. Resolution is county level, not site level.