SENATE WIND LLC

Operating

Wind power plant

Capacity
150 MW
Primary fuel
Wind
County
Jack County
Operator
SENATE WIND ENERGY LLC
Status
Operating
Commissioned
2012
EIA plant ID
57981
Generators
1
Technology
Onshore Wind Turbine
Net generation (2024)
414 GWh
Capacity factor (2024, EIA nameplate)
31%
Data vintage
EIA-860 2024 final; EIA-923 2022-2024 final
Coordinates
33.1428, -98.3867

See it on the map

SENATE WIND LLC, a 150 MW Wind power plant in Jack County, Texas. Operated by SENATE WIND ENERGY LLC, commissioned 2012.

How SENATE WIND LLC compares

With 150 MW of capacity, SENATE WIND LLC ranks 151st among the 307 operating power plants Bywatts maps in Texas and 30th of the 94 operating Wind plants in the state. It accounts for about 1.3% of Texas's operating Wind capacity and 0.1% of all operating capacity in the state. Nationally it is the 118th-largest of the 708 operating Wind plants in the database. Commissioned in 2012, it is newer than 88% of the 303 operating Texas plants with a recorded commissioning year. It shares Jack County with one other operating plant, BARTON CHAPEL WIND FARM.

EIA-860 lists 1 generator at the site with 150 MW of nameplate capacity, all onshore wind turbine technology. Net generation was 414 GWh in 2024 (a 31% capacity factor), down 16% from 2022.

Grid neighborhood

The closest transmission line found within 10 miles is a 345 kV line owned by ONCOR ELECTRIC DELIVERY CO., about 4.1 miles away. Another 2 operating power plants totaling 755 MW sit within 25 miles; the largest is GRAHAM (635 MW, Natural Gas).

Computed by Bywatts from HIFLD power plant and transmission line records and EIA-860/923 survey data; distances are straight-line. Sources and methodology

Weather peril exposure

SENATE WIND LLC is a 150 MW wind power plant in Jack County, TX, operated by SENATE WIND ENERGY LLC, commissioned in 2012. Jack County carries critical modeled catastrophe exposure in the FEMA National Risk Index, scoring 4.3 of 5 at the 82nd national percentile. Strong wind is the leading peril, rated Relatively Low by FEMA at the 93rd percentile.

The Bywatts loss layer is calibrated to solar PV hardware, so it is not applied to a wind plant. The ratings below are the FEMA National Risk Index county hazard ratings for this location.

4.3 of 5Modeled catastrophe exposure
CriticalExposure band
Strong windLeading peril
Very LowFEMA county risk rating

Jack County hazard ratings

PerilFEMA ratingNational percentilePeril scoreEvents per year
Strong windRelatively Low93rd4.7 of 53.2
WildfireRelatively Low90th4.6 of 5<0.01
HailRelatively Low84th4.4 of 58.7
TornadoRelatively Low67th3.7 of 50.73
Heat waveRelatively Low61st3.4 of 512.9
Ice stormRelatively Low60th3.4 of 50.77
LightningVery Low47th2.9 of 550.3
HurricaneVery Low45th2.8 of 5<0.01
Winter weatherVery Low41st2.6 of 55.2
EarthquakeVery Low24th2.0 of 5<0.01
Riverine floodingVery Low23rd1.9 of 50.82

Perils not assessed in Jack County

These perils carry no usable National Risk Index figure for this county, so they are excluded from the scoring rather than scored zero. A zero would claim the peril was assessed and found benign.

PerilWhy it is not scored
Coastal floodingFEMA rating is "Not Applicable" for this county

Model hail, wind and flood exposure for Jack County in the weather risk calculator

Ratings are the FEMA National Risk Index county hazard ratings; the peril score is a Bywatts transform of the FEMA national percentile. Full data sources and the solar vulnerability methodology are in the weather risk calculator.

Modeled estimate for screening and negotiation. Built from FEMA National Risk Index county hazard data and a solar vulnerability layer documented above. Not a quote, a binder, or actuarial advice, and not a substitute for a carrier's own model. Hazard data: FEMA National Risk Index December 2025, synced 2026-07-24. Resolution is county level, not site level.