BLOOMINGTON POWER PLANT

Operating

Oil power plant

Capacity
10 MW
Primary fuel
Oil
County
Washington County
Operator
CITY OF ST GEORGE
Status
Operating
Commissioned
1999
EIA plant ID
7767
Coordinates
37.0421, -113.6269

See it on the map

BLOOMINGTON POWER PLANT, a 10 MW Oil power plant in Washington County, Utah. Operated by CITY OF ST GEORGE, commissioned 1999.

Weather peril exposure

BLOOMINGTON POWER PLANT is a 10 MW oil power plant in Washington County, UT, operated by CITY OF ST GEORGE, commissioned in 1999. Washington County carries moderate modeled catastrophe exposure in the FEMA National Risk Index, scoring 2.0 of 5 at the 25th national percentile. Wildfire is the leading peril, rated Relatively High by FEMA at the 100th percentile.

The Bywatts loss layer is calibrated to solar PV hardware, so it is not applied to an oil plant. The ratings below are the FEMA National Risk Index county hazard ratings for this location.

2.0 of 5Modeled catastrophe exposure
ModerateExposure band
WildfireLeading peril
Relatively ModerateFEMA county risk rating

Washington County hazard ratings

PerilFEMA ratingNational percentilePeril scoreEvents per year
WildfireRelatively High100th5.0 of 50.02
Riverine floodingRelatively High82nd4.3 of 56.7
EarthquakeRelatively Low70th3.8 of 50.01
Heat waveRelatively Moderate30th2.2 of 52.5
Winter weatherRelatively Low14th1.6 of 517.0
LightningVery High11th1.4 of 541.4
HailVery Low7th1.3 of 50.09
Strong windVery Low7th1.3 of 50.18
TornadoVery Low1st1.0 of 50.04
Ice stormRelatively Low1st1.0 of 50.01

Perils not assessed in Washington County

These perils carry no usable National Risk Index figure for this county, so they are excluded from the scoring rather than scored zero. A zero would claim the peril was assessed and found benign.

PerilWhy it is not scored
HurricaneFEMA rating is "Not Applicable" for this county
Coastal floodingFEMA rating is "Not Applicable" for this county

Model hail, wind and flood exposure for Washington County in the weather risk calculator

Ratings are the FEMA National Risk Index county hazard ratings; the peril score is a Bywatts transform of the FEMA national percentile. Full data sources and the solar vulnerability methodology are in the weather risk calculator.

Modeled estimate for screening and negotiation. Built from FEMA National Risk Index county hazard data and a solar vulnerability layer documented above. Not a quote, a binder, or actuarial advice, and not a substitute for a carrier's own model. Hazard data: FEMA National Risk Index December 2025, synced 2026-07-24. Resolution is county level, not site level.