SIMPSON TACOMA KRAFT BIOMASS

Operating

Biomass power plant

Capacity
64 MW
Primary fuel
Biomass
County
Pierce County
Operator
SIMPSON TACOMA KRAFT CO LLC
Status
Operating
EIA plant ID
57099
Coordinates
47.2659, -122.4275

See it on the map

SIMPSON TACOMA KRAFT BIOMASS, a 64 MW Biomass power plant in Pierce County, Washington. Operated by SIMPSON TACOMA KRAFT CO LLC.

Weather peril exposure

SIMPSON TACOMA KRAFT BIOMASS is a 64 MW biomass power plant in Pierce County, WA, operated by SIMPSON TACOMA KRAFT CO LLC. Pierce County carries low modeled catastrophe exposure in the FEMA National Risk Index, scoring 1.2 of 5 at the 4th national percentile. Earthquake is the leading peril, rated Relatively High by FEMA at the 98th percentile.

The Bywatts loss layer is calibrated to solar PV hardware, so it is not applied to a biomass plant. The ratings below are the FEMA National Risk Index county hazard ratings for this location.

1.2 of 5Modeled catastrophe exposure
LowExposure band
EarthquakeLeading peril
Relatively HighFEMA county risk rating

Pierce County hazard ratings

PerilFEMA ratingNational percentilePeril scoreEvents per year
EarthquakeRelatively High98th4.9 of 50.04
Heat waveRelatively High64th3.6 of 53.8
Coastal floodingRelatively Moderate55th3.2 of 53.1
WildfireRelatively Low38th2.5 of 5<0.01
Riverine floodingRelatively High30th2.2 of 50.11
Ice stormRelatively High22nd1.9 of 50.64
Strong windRelatively Low8th1.3 of 50.01
LightningRelatively High6th1.2 of 59.3
HailVery Low5th1.2 of 50.03
Winter weatherRelatively Moderate4th1.2 of 527.0
TornadoRelatively Low4th1.1 of 50.07

Perils not assessed in Pierce County

These perils carry no usable National Risk Index figure for this county, so they are excluded from the scoring rather than scored zero. A zero would claim the peril was assessed and found benign.

PerilWhy it is not scored
HurricaneFEMA rating is "Not Applicable" for this county

Model hail, wind and flood exposure for Pierce County in the weather risk calculator

Ratings are the FEMA National Risk Index county hazard ratings; the peril score is a Bywatts transform of the FEMA national percentile. Full data sources and the solar vulnerability methodology are in the weather risk calculator.

Modeled estimate for screening and negotiation. Built from FEMA National Risk Index county hazard data and a solar vulnerability layer documented above. Not a quote, a binder, or actuarial advice, and not a substitute for a carrier's own model. Hazard data: FEMA National Risk Index December 2025, synced 2026-07-24. Resolution is county level, not site level.