LONGVIEW FIBRE

Partly retired

Biomass power plant

Capacity
123 MW
Primary fuel
Biomass
County
Cowlitz County
Operator
LONGVIEW FIBRE CO
EIA plant ID
54562
Generators
2
Technology
Wood/Wood Waste Biomass
Net generation (2024)
235 GWh
Capacity factor (2024, EIA nameplate)
60%
Data vintage
EIA-860 2024 final; EIA-923 2022-2024 final
Coordinates
46.1024, -122.9224

See it on the map

LONGVIEW FIBRE, a partly retired 123 MW Biomass power plant in Cowlitz County, Washington. Most of its capacity was retired, most recently in 2018, according to EIA-860.

How LONGVIEW FIBRE compares

EIA-860 lists 45 MW still operable at the site (wood/wood waste biomass), against the 123 MW recorded for it. It shares Cowlitz County with 5 other operating plants, including MINT FARM GENERATING STATION and MERWIN.

EIA-860 lists 2 generators at the site with 45 MW of nameplate capacity, all wood/wood waste biomass technology (this page's HIFLD capacity figure is 123 MW). Net generation was 235 GWh in 2024 (a 60% capacity factor), up 8% from 2022. Its generators came online between 1958 and 1966.

Grid neighborhood

The nearest named substation is COWLITZ (115 kV), about 1.1 miles away; the closest transmission line found within 10 miles is a 115 kV line owned by PUD NO 1 OF COWLITZ COUNTY, under 0.1 miles away. Another 6 operating power plants totaling 1,644 MW sit within 25 miles; the largest is BEAVER (611 MW, Natural Gas). Within 50 miles are 2 mapped data centers; the nearest is Digital Fortress (PTL) in Portland, about 41.8 miles away.

Computed by Bywatts from HIFLD power plant, substation and transmission line records, EIA-860/923 survey data and PeeringDB data center locations; distances are straight-line. Sources and methodology

Weather peril exposure

LONGVIEW FIBRE is a partly retired 123 MW biomass power plant in Cowlitz County, WA, operated by LONGVIEW FIBRE CO. Cowlitz County carries elevated modeled catastrophe exposure in the FEMA National Risk Index, scoring 2.6 of 5 at the 40th national percentile. Coastal flooding is the leading peril, rated Relatively Low by FEMA at the 98th percentile.

The Bywatts loss layer is calibrated to solar PV hardware, so it is not applied to a biomass plant. The ratings below are the FEMA National Risk Index county hazard ratings for this location.

2.6 of 5Modeled catastrophe exposure
ElevatedExposure band
Coastal floodingLeading peril
Relatively ModerateFEMA county risk rating

Cowlitz County hazard ratings

PerilFEMA ratingNational percentilePeril scoreEvents per year
Coastal floodingRelatively Low98th4.9 of 51.6
EarthquakeRelatively Moderate97th4.9 of 50.02
Riverine floodingRelatively Moderate87th4.5 of 50.75
Heat waveRelatively Moderate66th3.6 of 55.0
Strong windRelatively Low39th2.5 of 50.04
WildfireVery Low35th2.4 of 5<0.01
Winter weatherRelatively Low19th1.8 of 521.1
Ice stormRelatively Low15th1.6 of 50.33
HailVery Low11th1.4 of 50.05
TornadoVery Low10th1.4 of 50.09
LightningVery Low3rd1.1 of 56.1

Perils not assessed in Cowlitz County

These perils carry no usable National Risk Index figure for this county, so they are excluded from the scoring rather than scored zero. A zero would claim the peril was assessed and found benign.

PerilWhy it is not scored
HurricaneFEMA rating is "Not Applicable" for this county

Model hail, wind and flood exposure for Cowlitz County in the weather risk calculator

Ratings are the FEMA National Risk Index county hazard ratings; the peril score is a Bywatts transform of the FEMA national percentile. Full data sources and the solar vulnerability methodology are in the weather risk calculator.

Modeled estimate for screening and negotiation. Built from FEMA National Risk Index county hazard data and a solar vulnerability layer documented above. Not a quote, a binder, or actuarial advice, and not a substitute for a carrier's own model. Hazard data: FEMA National Risk Index December 2025, synced 2026-07-24. Resolution is county level, not site level.