M C DIXON LUMBER

Operating

Power plant

Capacity
3 MW
County
Barbour County
Operator
M C DIXON LUMBER CO INC
Status
Operating
EIA plant ID
54745
Coordinates
31.8850, -85.1535

See it on the map

M C DIXON LUMBER, a 3 MW power plant in Barbour County, Alabama. Operated by M C DIXON LUMBER CO INC. One of 78 power plants tracked in Alabama on Bywatts.

Weather peril exposure

M C DIXON LUMBER is a 3 MW power plant in Barbour County, AL, operated by M C DIXON LUMBER CO INC. Barbour County carries moderate modeled catastrophe exposure in the FEMA National Risk Index, scoring 1.8 of 5 at the 20th national percentile. Lightning is the leading peril, rated Relatively Moderate by FEMA at the 94th percentile.

The Bywatts loss layer is calibrated to solar PV hardware, so it is not applied to this plant. The ratings below are the FEMA National Risk Index county hazard ratings for this location.

1.8 of 5Modeled catastrophe exposure
ModerateExposure band
LightningLeading peril
Relatively LowFEMA county risk rating

Barbour County hazard ratings

PerilFEMA ratingNational percentilePeril scoreEvents per year
LightningRelatively Moderate94th4.8 of 569.4
HurricaneRelatively Low79th4.2 of 50.11
TornadoRelatively Moderate65th3.6 of 50.80
EarthquakeVery Low47th2.9 of 5<0.01
Heat waveRelatively Low42nd2.7 of 58.9
WildfireVery Low40th2.6 of 5<0.01
Riverine floodingRelatively Low37th2.5 of 50.25
Strong windRelatively Low35th2.4 of 51.5
Ice stormRelatively Low31st2.2 of 50.39
Winter weatherVery Low29th2.2 of 50.84
HailRelatively Low20th1.8 of 51.8

Perils not assessed in Barbour County

These perils carry no usable National Risk Index figure for this county, so they are excluded from the scoring rather than scored zero. A zero would claim the peril was assessed and found benign.

PerilWhy it is not scored
Coastal floodingFEMA rating is "Not Applicable" for this county

Model hail, wind and flood exposure for Barbour County in the weather risk calculator

Ratings are the FEMA National Risk Index county hazard ratings; the peril score is a Bywatts transform of the FEMA national percentile. Full data sources and the solar vulnerability methodology are in the weather risk calculator.

Modeled estimate for screening and negotiation. Built from FEMA National Risk Index county hazard data and a solar vulnerability layer documented above. Not a quote, a binder, or actuarial advice, and not a substitute for a carrier's own model. Hazard data: FEMA National Risk Index December 2025, synced 2026-07-24. Resolution is county level, not site level.