ARKANSAS NUCLEAR ONE

Operating

Nuclear power plant

Capacity
1,845 MW
Primary fuel
Nuclear
County
Pope County
Operator
ENTERGY ARKANSAS INC
Status
Operating
Commissioned
1974
EIA plant ID
8055
Generators
2
Technology
Nuclear
Net generation (2024)
14,763 GWh
Capacity factor (2024, EIA nameplate)
91%
Data vintage
EIA-860 2024 final; EIA-923 2022-2024 final
Coordinates
35.3106, -93.2310

See it on the map

ARKANSAS NUCLEAR ONE, a 1,845 MW Nuclear power plant in Pope County, Arkansas. Operated by ENTERGY ARKANSAS INC, commissioned 1974.

How ARKANSAS NUCLEAR ONE compares

With 1,845 MW of capacity, ARKANSAS NUCLEAR ONE ranks 2nd among the 48 operating power plants Bywatts maps in Arkansas. It accounts for about 11% of all operating capacity in Arkansas. Nationally it is the 27th-largest of the 55 operating Nuclear plants in the database. Commissioned in 1974, it is older than 62% of the 48 operating Arkansas plants with a recorded commissioning year. Its operator, ENTERGY ARKANSAS INC, runs 7 operating plants in Arkansas totaling 6,977 MW. It shares Pope County with one other operating plant, DARDANELLE.

EIA-860 lists 2 generators at the site with 1,845 MW of nameplate capacity, all nuclear technology. Net generation was 14,763 GWh in 2024 (a 91% capacity factor), up 3% from 2022. Its generators came online between 1974 and 1980.

Grid neighborhood

The closest transmission line found within 10 miles is a 500 kV line owned by ENTERGY ARKANSAS INC, under 0.1 miles away. One other operating power plant sits within 25 miles: DARDANELLE (161 MW, Hydro).

Computed by Bywatts from HIFLD power plant and transmission line records and EIA-860/923 survey data; distances are straight-line. Sources and methodology

Weather peril exposure

ARKANSAS NUCLEAR ONE is a 1,845 MW nuclear power plant in Pope County, AR, operated by ENTERGY ARKANSAS INC, commissioned in 1974. Pope County carries elevated modeled catastrophe exposure in the FEMA National Risk Index, scoring 3.0 of 5 at the 49th national percentile. Ice storm is the leading peril, rated Very High by FEMA at the 96th percentile.

The Bywatts loss layer is calibrated to solar PV hardware, so it is not applied to a nuclear plant. The ratings below are the FEMA National Risk Index county hazard ratings for this location.

3.0 of 5Modeled catastrophe exposure
ElevatedExposure band
Ice stormLeading peril
Relatively LowFEMA county risk rating

Pope County hazard ratings

PerilFEMA ratingNational percentilePeril scoreEvents per year
Ice stormVery High96th4.8 of 51.4
TornadoRelatively High90th4.6 of 50.58
Riverine floodingRelatively Moderate88th4.5 of 51.5
Winter weatherRelatively Moderate86th4.4 of 56.8
EarthquakeRelatively Low84th4.4 of 5<0.01
LightningRelatively Moderate75th4.0 of 560.5
WildfireRelatively Low70th3.8 of 5<0.01
Strong windRelatively Moderate63rd3.5 of 53.5
Heat waveRelatively Moderate60th3.4 of 516.0
HailRelatively Low48th2.9 of 55.3
HurricaneVery Low32nd2.3 of 5<0.01

Perils not assessed in Pope County

These perils carry no usable National Risk Index figure for this county, so they are excluded from the scoring rather than scored zero. A zero would claim the peril was assessed and found benign.

PerilWhy it is not scored
Coastal floodingFEMA rating is "Not Applicable" for this county

Model hail, wind and flood exposure for Pope County in the weather risk calculator

Ratings are the FEMA National Risk Index county hazard ratings; the peril score is a Bywatts transform of the FEMA national percentile. Full data sources and the solar vulnerability methodology are in the weather risk calculator.

Modeled estimate for screening and negotiation. Built from FEMA National Risk Index county hazard data and a solar vulnerability layer documented above. Not a quote, a binder, or actuarial advice, and not a substitute for a carrier's own model. Hazard data: FEMA National Risk Index December 2025, synced 2026-07-24. Resolution is county level, not site level.