ROCKY REACH

Operating

Hydro power plant

Capacity
1,300 MW
Primary fuel
Hydro
County
Chelan County
Operator
PUD NO 1 OF CHELAN COUNTY
Status
Operating
Commissioned
1961
EIA plant ID
3883
Coordinates
47.5330, -120.2940

See it on the map

ROCKY REACH, a 1,300 MW Hydro power plant in Chelan County, Washington. Operated by PUD NO 1 OF CHELAN COUNTY, commissioned 1961.

Weather peril exposure

ROCKY REACH is a 1,300 MW hydro power plant in Chelan County, WA, operated by PUD NO 1 OF CHELAN COUNTY, commissioned in 1961. Chelan County carries moderate modeled catastrophe exposure in the FEMA National Risk Index, scoring 2.5 of 5 at the 36th national percentile. Wildfire is the leading peril, rated Relatively High by FEMA at the 100th percentile.

The Bywatts loss layer is calibrated to solar PV hardware, so it is not applied to a hydro plant. The ratings below are the FEMA National Risk Index county hazard ratings for this location.

2.5 of 5Modeled catastrophe exposure
ModerateExposure band
WildfireLeading peril
Relatively ModerateFEMA county risk rating

Chelan County hazard ratings

PerilFEMA ratingNational percentilePeril scoreEvents per year
WildfireRelatively High100th5.0 of 50.02
Riverine floodingRelatively Moderate95th4.8 of 51.5
EarthquakeRelatively Low85th4.4 of 5<0.01
Heat waveRelatively Low62nd3.5 of 53.7
Winter weatherRelatively Moderate40th2.6 of 526.4
LightningRelatively High7th1.3 of 59.9
Strong windVery Low4th1.2 of 50.06
TornadoVery Low4th1.2 of 50.05
Ice stormVery Low4th1.2 of 50.07
HailRelatively Low4th1.1 of 50.07

Perils not assessed in Chelan County

These perils carry no usable National Risk Index figure for this county, so they are excluded from the scoring rather than scored zero. A zero would claim the peril was assessed and found benign.

PerilWhy it is not scored
HurricaneFEMA rating is "Not Applicable" for this county
Coastal floodingFEMA rating is "Not Applicable" for this county

Model hail, wind and flood exposure for Chelan County in the weather risk calculator

Ratings are the FEMA National Risk Index county hazard ratings; the peril score is a Bywatts transform of the FEMA national percentile. Full data sources and the solar vulnerability methodology are in the weather risk calculator.

Modeled estimate for screening and negotiation. Built from FEMA National Risk Index county hazard data and a solar vulnerability layer documented above. Not a quote, a binder, or actuarial advice, and not a substitute for a carrier's own model. Hazard data: FEMA National Risk Index December 2025, synced 2026-07-24. Resolution is county level, not site level.