SIERRA PACIFIC BURLINGTON FACILITY

Operating

Biomass power plant

Capacity
28 MW
Primary fuel
Biomass
County
Skagit County
Operator
SIERRA PACIFIC INDUSTRIES INC
Status
Operating
Commissioned
2007
EIA plant ID
56406
Coordinates
48.4497, -122.4373

See it on the map

SIERRA PACIFIC BURLINGTON FACILITY, a 28 MW Biomass power plant in Skagit County, Washington. Operated by SIERRA PACIFIC INDUSTRIES INC, commissioned 2007.

Weather peril exposure

SIERRA PACIFIC BURLINGTON FACILITY is a 28 MW biomass power plant in Skagit County, WA, operated by SIERRA PACIFIC INDUSTRIES INC, commissioned in 2007. Skagit County carries elevated modeled catastrophe exposure in the FEMA National Risk Index, scoring 2.9 of 5 at the 48th national percentile. Coastal flooding is the leading peril, rated Relatively High by FEMA at the 99th percentile.

The Bywatts loss layer is calibrated to solar PV hardware, so it is not applied to a biomass plant. The ratings below are the FEMA National Risk Index county hazard ratings for this location.

2.9 of 5Modeled catastrophe exposure
ElevatedExposure band
Coastal floodingLeading peril
Relatively ModerateFEMA county risk rating

Skagit County hazard ratings

PerilFEMA ratingNational percentilePeril scoreEvents per year
Coastal floodingRelatively High99th5.0 of 53.4
EarthquakeRelatively Moderate96th4.8 of 50.04
Riverine floodingRelatively Moderate78th4.1 of 50.32
Heat waveRelatively Low49th2.9 of 52.4
WildfireVery Low30th2.2 of 5<0.01
Winter weatherRelatively Moderate29th2.1 of 537.1
Ice stormRelatively High29th2.1 of 50.45
TornadoVery Low3rd1.1 of 50.02
LightningRelatively Low3rd1.1 of 57.3
HailVery Low2nd1.1 of 50.02
Strong windVery Low0th1.0 of 50.02

Perils not assessed in Skagit County

These perils carry no usable National Risk Index figure for this county, so they are excluded from the scoring rather than scored zero. A zero would claim the peril was assessed and found benign.

PerilWhy it is not scored
HurricaneFEMA rating is "Not Applicable" for this county

Model hail, wind and flood exposure for Skagit County in the weather risk calculator

Ratings are the FEMA National Risk Index county hazard ratings; the peril score is a Bywatts transform of the FEMA national percentile. Full data sources and the solar vulnerability methodology are in the weather risk calculator.

Modeled estimate for screening and negotiation. Built from FEMA National Risk Index county hazard data and a solar vulnerability layer documented above. Not a quote, a binder, or actuarial advice, and not a substitute for a carrier's own model. Hazard data: FEMA National Risk Index December 2025, synced 2026-07-24. Resolution is county level, not site level.